Foredom Wayne Werner Bench Lathe Polishing Kit - AK3371
Foredom Wayne Werner Bench Lathe Polishing Kit - AK3371 ...è stato ordinato al fornitore e verrà spedito non appena sarà di nuovo disponibile.
Non è stato possibile caricare la disponibilità per il ritiro
Foredom Wayne Werner Bench Lathe Polishing Kit - AK3371
Wayne Werner, a jewelry, craftsman, and Foredom�� demonstrator developed this inclusive polishing accessory assortment kit is for specific use with the BL Bench Lathe. This 57-piece assortment includes cotton buffs, compounds, and scotch-brite discs for use on the BL Bench Lathe to pre-polish precious metals, and finish pewters and white metals. Also removes scratches and sprue marks, plus it also cleans the insides of rings and solder joints.
This convenient kit includes the following products:
��� Cotton Buffs & Square-Edge Solid Felt Buffs: Two each of 3-soft cotton buffs and square-edge solid felt buffs (maximum speed rating is 5,000 RPM). Cotton Buffs are for final polishing with compounds on precious metals (especially high karat gold and silver). Shellac-reinforced center pin holes fit tightly onto tapered mandrels. The square-edge solid felt buffs are made of tightly-compressed wool felt in rock-hard density for polishing in grooves and crevices. They also have pin hole centers for mounting on tapered spindles. For use with cutting and polishing.
��� Polishing Compounds: (1) platinum blue 5 ounce bar for pre-polishing and cutting down of platinum and other metals, plus using for final acrylic polishing; and (1) 5.75 ounce platinum white bar for final polishing purposes. Produces a deep luster, high color final polish on platinum gold, silver, and all metals.
��� Six each of 3M Scotch-Brite Radial Bristle 3" Discs: 80, 120, 220, 400, 1200, 3000, and 14,000 grits. Maximum speed rating is 20,000 RPM; recommended speed much lower and varies by grit: 80 grit is 3,000 to 15,000; 120, 220 & 400 grit is 3,000 to 18,000; 1,200, 3,000, & 14,000 grit is 1,750 to 7,500. These are molded plastic discs embedded with aluminum oxide mineral and a blend of patented 3M Cubitron a tough, long lasting ceramic aluminum oxide mineral with sharper edges than regular aluminum oxide. The abrasive filled bristles apply a continuous fresh supply of mineral to the work piece and dont require compounds. The flexible bristles reach into grooves and contours on irregular surfaces or work on flat areas.
��� Tapered Spindle Adapters with a 3/8" arbor hole for mounting Radial Bristle Discs onto tapered spindles of lathe: Two A-4561 Adapters (black) for right side mounting and seven A-4562 Adapters (gray) for left side mounting.
Pagamento e sicurezza
Modalità di pagamento
I tuoi dati di pagamento vengono elaborati in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso ai dati della tua carta di credito.
Griglia di confronto dei prodotti
Aggiungi qui contenuti per spiegare un po' la gamma di prodotti offerti e quali potrebbero essere più adatti ai tuoi clienti.
| Caratteristica | ||||
|---|---|---|---|---|
| Prezzo | ||||
| Prezzo |
$0.30
Prezzo unitario
/
Non disponibile
|
$5.25
Prezzo unitario
/
Non disponibile
|
$28.33
Prezzo unitario
/
Non disponibile
|
$21.95
Prezzo unitario
/
Non disponibile
|
| Descrizione | ||||
| Descrizione | Simple yet professional, the .925 Sterling Silver ball chain is versatile for your jewelry pieces. Sold per inch (minimum of... | Gold Frenchwire - 0.80 mm to 1 Meter Gold/Yellow French wire is tightly coiled wire that is used to complete... | Made from high-density steel, this item is great for cutting soft metals up to 18 gauge. Sizes: 1/8" - .118"... | 1-1/2" Natural Rawhide Hammer Leather Mallet An essential tool to be used for jewelry forming, stamping, and hammering metals and... |
Let customers speak for us
Great Quality bench for the price! PMC Supplies customer service was great. Very Easy to assemble and set up.
Excellent hands down! This is the best especially if you use resin of any brand any kind!
So far I’m loving this bench. I’ve had it less than a week but I am impressed not only by the workbench but by the customer care at PMC Supplies. The bench arrived in three boxes that were not too heavy that I needed help going upstairs. There were probably 20 wood pieces and a hefty bag of hardware, but in just about two hours I assembled the workbench myself. The top of the bench was cracked upon opening, which was odd since it was inside three boxes. When I contacted PMC Supplies about this, they offered to replace the top or refund part of my purchase price so I could repair it myself. In any case, the bench and shelf have plenty of room for nearly all my tools. I’ve been able to empty three medium to small tool bags and fully stock the bench. I’ve added a flex shaft mount and tool and I will be adding drawer pulls to the drawers to make them easier to open.
Pros
Easy to assemble.
Sturdy, all-wood construction.
Shelf has plenty of needed space for tools and storage.
Excellent customer service.
Cons
Wood is somewhat soft, maybe pine? Doesn’t really matter as any bench will show signs of wear over time.
Holes on shelves are too small for some tools, particularly hammers.
Top was cracked upon arrival but PMC Supplies made it right.
This is the perfect product for my sand casting applications! It packs the petrobond well - and easy to use. Highly recommend!
Works Perfect. Good Quality.. Will buy again
I have been on the lookout for a more affordable diamond coated tipped tweezers and I have finally found them! I'm not a jewelry maker but I use these for volume eyelash extensions. There is a lash company called Novalash that makes a pair but it is $104 and I couldn't fathom spending that on one pair. I went on the hunt like a hawk to find a pair of diamond dusted tweezers at a more affordable price and found them on your site. Please don't discontinue these tweezers and I would like to know if you are going to carry more straight tweezers with Diamond Coated tips? Thank you PMC supplies!
Great furnace great customer service.
I received the kit in 2 days. Crazy fast. I ran it through a bag of cans to see how it works. I could feed it a can every ±20 seconds. Works great. I'm confident this will be a good addition to my pour process.
This crucible is absolutely worth every penny! Been kicking the heck out of this thing for a year and a half, still rocking. I actually cracked it on the side from a thermal variance (my fault-newbie), and it healed itself again. The vitrification is essentially self healing. I am here to buy another, a larger one, right now.
Great furnace! I’m new to this hobby, so I wasn’t sure about this website or this product but both have been excellent! The furnace has had about 10 fires and other than some discoloration, no real issues. The stone in the bottom broke around the 8th fire but still does the job. This furnace can get hot enough to melt copper EASY. I haven’t tried anything else yet.
Absolutly perfect for brass and aluminum used several times and never have problems looks just like I just took out of the box 5 star
I love this furnace, I am very pleased with my purchase, it will be useful for a very long time. If unsure which furnace to get, this one will certainly not disappoint... Have fun!
Just as advertised, it works great to melt brass and copper in. I will purchase this again in the future.
Just as advertised, it works great! Speedy shipping and a great product for a great price!
