Foredom's K.2230 Classic Jeweler's Flex Shaft Kit with H.30 Handpiece Foot Control & Accessories
Foredom's K.2230 Classic Jeweler's Flex Shaft Kit with H.30 Handpiece Foot Control & Accessories ...è stato ordinato al fornitore e verrà spedito non appena sarà di nuovo disponibile.
Non è stato possibile caricare la disponibilità per il ritiro
Foredom's K.2230 Classic Jeweler's Flex Shaft Kit with H.30...
Foredom's K.2230 Classic Jeweler's Flex Shaft Kit with H.30 Handpiece Foot Control & Accessories
These specialty kits contain just about everything you need to get to work - motor, speed control, handpiece, and accessories. When purchased with an optional motor hanger, you are ready to go straight out of the box! The motor and speed control carry a 2-year limited manufacturer's warranty. Always wear eye and face protection while using/operating power tools.
Components:
• Series SR Motor: Foredom®'s most popular and best motor for general use. The 1/6 HP, ball bearing, hang-up style; M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shafting for connecting to any of Foredom®'s interchangeable handpieces. Hanger not included.
• C.FCT Speed Control: Foredom®'s most popular foot-operated speed control has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.
• H.30 Handpiece: Foredom's most popular general purpose handpiece features a 3-jaw, geared chuck with a 0-5/32" capacity. Accessory changes are easy using the supplied HPCK-0 Chuck Key in molded plastic handle.
• AK11 Accessory Kit: A 42 piece assortment of metal working accessories including various shapes, sizes, and grits of Satin Finishers, Bristle and Brass Cup, Wheel & End Brushes, Scotch-Brite™ Radial Bristle Discs, High Speed Steel Fluted Engraving Burs, Rubber Bonded Abrasive Wheel and Disc, Purple Ceramic Sanding Bands, Screw and Rubber Drum Mandrels, V Stone and Unitized Points, and Platinum White Polishing Compound.
• A-10081 Rotating Bur Holder.
• Flexible Shaft Grease.
WARNING: This product can expose you to chemicals including acrylonitrile, carbon-black extracts, lead, nickel, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).
Pagamento e sicurezza
Modalità di pagamento
I tuoi dati di pagamento vengono elaborati in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso ai dati della tua carta di credito.
Griglia di confronto dei prodotti
Aggiungi qui contenuti per spiegare un po' la gamma di prodotti offerti e quali potrebbero essere più adatti ai tuoi clienti.
| Caratteristica | ||||
|---|---|---|---|---|
| Prezzo | ||||
| Prezzo |
$0.30
Prezzo unitario
/
Non disponibile
|
$5.25
Prezzo unitario
/
Non disponibile
|
$28.33
Prezzo unitario
/
Non disponibile
|
$21.95
Prezzo unitario
/
Non disponibile
|
| Descrizione | ||||
| Descrizione | Simple yet professional, the .925 Sterling Silver ball chain is versatile for your jewelry pieces. Sold per inch (minimum of... | Gold Frenchwire - 0.80 mm to 1 Meter Gold/Yellow French wire is tightly coiled wire that is used to complete... | Made from high-density steel, this item is great for cutting soft metals up to 18 gauge. Sizes: 1/8" - .118"... | 1-1/2" Natural Rawhide Hammer Leather Mallet An essential tool to be used for jewelry forming, stamping, and hammering metals and... |
Let customers speak for us
Great Quality bench for the price! PMC Supplies customer service was great. Very Easy to assemble and set up.
Excellent hands down! This is the best especially if you use resin of any brand any kind!
So far I’m loving this bench. I’ve had it less than a week but I am impressed not only by the workbench but by the customer care at PMC Supplies. The bench arrived in three boxes that were not too heavy that I needed help going upstairs. There were probably 20 wood pieces and a hefty bag of hardware, but in just about two hours I assembled the workbench myself. The top of the bench was cracked upon opening, which was odd since it was inside three boxes. When I contacted PMC Supplies about this, they offered to replace the top or refund part of my purchase price so I could repair it myself. In any case, the bench and shelf have plenty of room for nearly all my tools. I’ve been able to empty three medium to small tool bags and fully stock the bench. I’ve added a flex shaft mount and tool and I will be adding drawer pulls to the drawers to make them easier to open.
Pros
Easy to assemble.
Sturdy, all-wood construction.
Shelf has plenty of needed space for tools and storage.
Excellent customer service.
Cons
Wood is somewhat soft, maybe pine? Doesn’t really matter as any bench will show signs of wear over time.
Holes on shelves are too small for some tools, particularly hammers.
Top was cracked upon arrival but PMC Supplies made it right.
This is the perfect product for my sand casting applications! It packs the petrobond well - and easy to use. Highly recommend!
Works Perfect. Good Quality.. Will buy again
I have been on the lookout for a more affordable diamond coated tipped tweezers and I have finally found them! I'm not a jewelry maker but I use these for volume eyelash extensions. There is a lash company called Novalash that makes a pair but it is $104 and I couldn't fathom spending that on one pair. I went on the hunt like a hawk to find a pair of diamond dusted tweezers at a more affordable price and found them on your site. Please don't discontinue these tweezers and I would like to know if you are going to carry more straight tweezers with Diamond Coated tips? Thank you PMC supplies!
Great furnace great customer service.
I received the kit in 2 days. Crazy fast. I ran it through a bag of cans to see how it works. I could feed it a can every ±20 seconds. Works great. I'm confident this will be a good addition to my pour process.
This crucible is absolutely worth every penny! Been kicking the heck out of this thing for a year and a half, still rocking. I actually cracked it on the side from a thermal variance (my fault-newbie), and it healed itself again. The vitrification is essentially self healing. I am here to buy another, a larger one, right now.
Great furnace! I’m new to this hobby, so I wasn’t sure about this website or this product but both have been excellent! The furnace has had about 10 fires and other than some discoloration, no real issues. The stone in the bottom broke around the 8th fire but still does the job. This furnace can get hot enough to melt copper EASY. I haven’t tried anything else yet.
Absolutly perfect for brass and aluminum used several times and never have problems looks just like I just took out of the box 5 star
I love this furnace, I am very pleased with my purchase, it will be useful for a very long time. If unsure which furnace to get, this one will certainly not disappoint... Have fun!
Just as advertised, it works great to melt brass and copper in. I will purchase this again in the future.
Just as advertised, it works great! Speedy shipping and a great product for a great price!
